Conditioning Bath

TT-100

These conditioning baths are designed for conditioning polyamide mouldings with water and steam operation up to 90ºC.

  • Switchable from water to steam operation
  • Two models available: 150 litre / 300 litre
  • Self-optimising microprocessor controller
  • Heating switchable in stages
  • Automatic level control with warning light
  • Tank made of stainless steel
  • Perforated plate baskets made of stainless steel
  • Tank and cover with thermal insulation
  • Mounted on castors 24-hours switch clock or 7-days quartz switch clock with 100 h power reserve


Water operation The tank is filled completely with water, allowing all parts to be immersed for conditioning in the shortest time. The unit is equipped with an automatic water refill.

Steam operation The parts are exposed to steam (max. 90ºC) instead of water. This procedure prevents water spots. the unit is equipped with an automatic water refill. Additional conditioning time of approx. 50-100% is required.

Specifications
  • Model: TT-100 K-E  or   TT-100 KB-E 
  • System: Switchable from water to steam operation
  • Tank Content: 150 Litres     300 Litres
  • Heating Power: Temperature Control:      self-optimising microprocessor     controller with digital Display
  • Temperature Range: up to max. 90º C
  • Water Refill: Automatic  
  • Number of Perforated: 2     4
  • Plate Baskets: Size of Basket:     445 x 340 x 375 mm     445 x 340 x 375 mm
  • Size of Tank: 750 x 480 x 475 mm     1500 x 480 x 475 mm
  • Dimensions: 1150 x 530 x 850 mm     1900 x 530 x 850 mm
  • Weight Empty: Approx. 130 kg     approx. 210 kg
  • Colour: Silver grey RAL 7001     
Enquire Now

Need help or advice on our products? Enquire Now

/Content/Images/news/chemical-resized.jpg

Latest News

Chemical

In 2018 Tool-Temp installed two TT430 Y units to a chemical company. These units were produced for the customer and are now listed as a machine in our product range. We flew the customer out to our head office in Switzerland to meet with the person in charge of the project, once they had all the requirements the machines went through to production. The units are equipped with three independent heat exchangers. The three-circuit cooling system makes it possible to work with oil below zero degrees. The installed self-optimizing temperature controller MP-988 works with three temperature probe inlets. The reference temperature for the regulation can be the temperature of the product inside the vessel or the oil temperature in the tank of the unit. To avoid any damage of the jacket, the pump pressure can be adjusted to the specifications of the vessel/reactor. The pump revolutions per minute can be adjusted very easily using the frequency inverter. As well as many other features.

Read Article More News