Air & Water Cooled Chillers

TT-28500

The TT-28500 range comprises air cooled portable units with or without heating elements and water cooled units. All are rated at 28 kW.

  • Compressor switches on and off automatically to maintain set temperature - circulation pump runs continuously
  • Self-optimising microprocessor controller with digital display of set and actual temperature
  • Electronic control of compressor operating time for extended working life
  • All components in contact with water are stainless steel or bronze Anti-freeze thermostat prevents freezing
  • Automatic or manual refill
  • Automatic level control with pre-warning at low water level Indication lamps for thermal relay of pump and compressor, anti-freeze, low and high pressure and high temperature
  • Audible alarm in case of failure
Specifications

There are 2 different models available:
 

   
TT-28000 H Air-cooled unit with heating element
TT-28000 WK Water-cooled unit
Model:  TT-28500 H TT-28500 WK
Cooling Capacity:    
Nominal: 28 kW 28 kW
Cooling Capacity:    
Circulating Water: +10ºC up to +40ºC +10ºC up to +40ºC 
Air Temperature:  +2ºC up to +45ºC +2ºC up to +45ºC
Heating Capacity 9kw 9kw
Contents Water 
Tank:
150 Litres 150 Litres
Refrigerating Agent: R-134a R-134a 
Temperature Control:     Self-optimising microprocessor controller with digital display of set and actual temperatures
Pump Capacity max. 4,8 bar / max. 140l/min - at 100 l/min 3,0 bar.
Compressor: Hermatically sealed
Condenser: Air cooled, air inlet located on the reart, blow out located on the top 
Air Volume: 5'700 m3/h  No Fan 
Power 
Consumption:  
        
approx. 8,5 kW approx. 8,1 kW
Connections:    
TO/FROM mould 1" female thread 1" female thread
Auto. water refill 3/8" female thread 3/8" female thread
Cooling water IN    3/4" female thread
Cooling water OUT   1" female thread
Dimensions L x W x H: 1'100 x 790 x 1'660 mm, incl. castors  
Noise level: (in 3 m) 73 dBA 73 dBA
Weight:    
Colour:  or stainless steel case,  not varnished
The Model TT-54000 WK is water cooled and needs at least 1,5 bar water pressure:  
with cooling tower water (approx. 30ºC):  approx. 65 l/min. cooling water consumption 
with tap water (approx. 10 - 15ºC):  approx. 25-40 l/min. cooling water consumption 
Safety Devices
  • Level control provides auto dry run protection
  • Separate mechanical safety thermostat for maximum and minimum temperature
  • Temperature limiter installed in the controller
  • Main switch, automatic cutouts, transformer and main protection switch
  • Audible and visual alarm in case of  failure
Enquire Now

Need help or advice on our products? Enquire Now

/Content/Images/news/chemical-resized.jpg

Latest News

Chemical

In 2018 Tool-Temp installed two TT430 Y units to a chemical company. These units were produced for the customer and are now listed as a machine in our product range. We flew the customer out to our head office in Switzerland to meet with the person in charge of the project, once they had all the requirements the machines went through to production. The units are equipped with three independent heat exchangers. The three-circuit cooling system makes it possible to work with oil below zero degrees. The installed self-optimizing temperature controller MP-988 works with three temperature probe inlets. The reference temperature for the regulation can be the temperature of the product inside the vessel or the oil temperature in the tank of the unit. To avoid any damage of the jacket, the pump pressure can be adjusted to the specifications of the vessel/reactor. The pump revolutions per minute can be adjusted very easily using the frequency inverter. As well as many other features.

Read Article More News