Home Temperature Control Units Water Temperature Control Units TT-168-PHE

Water Temperature Control Units

TT-168-PHE

TT-168 PHE is a range of specialist units with high cooling capacities. TT-168 PHE units are ideal for use with water from 20ºC to 50ºC.

  • Dual heat exchangers: standard type for high temperatures, plate type can be switched on for low temperature use
  • Automatic mould drain
  • Leakstopper – operation in pressure or vacuum mode
  • Self-optimising microprocessor controller with digital display of set and actual temperature
  • Level control – audible pre-shutdown warning
  • Automatic temperature control – audible alarm sounds when unit deviates outside 5ºC preset (adjustable)
  • Automatic water refill - time limited to prevent over-filling due to defective hoses
  • Connection for optional external thermocouple
  • Limescale-free heat exchanger
  • Heating switchable in stages
Specifications
  • Model:  TT-168E/PHE / TT-168H/PHE  or   TT-168EA/PHE / TT-168H/A/PHE
  • Heating Capacity: 12 kW switchable in stages 3/9/12 kW   or  18 kW switchable in stages 6/12/18 kW
  • Temperature Range: 20ºC to 90ºC with water. The lowest medium temperature depends on the temperature of cooling water. This should be at least 10ºC lower than the temperature of the medium.
  • Control: self-optimising microprocessor controller with digital display of set and actual temperatures
  • Flow Control:  Electronic with digital display and automatic control of the minimum flow.
  • Cooling Capacity: standard heat exchanger 20,000 kcal/h at 90ºC. Plate heat exchanger 100,000 kcal/h at 90ºC
  • Pump Capacity pressure mode: max 4.0 bar     / max 8.0 bar  - max. 75 l/min. / max. 75 l/min.
  • Vacuum Mode:  max 8m H2O (water column)
  • Unit contents: min 16 litres / max 20 litres
  • Connections: medium: 3/4" female thread - cooling water: 1" male thread
  • Dimensions:  L 980 x W 365 x H 740 mm incl. castors
  • Weight: approx 87kg
  • Colour:  silver grey RAL 7001
Safety Devices
  • Level control provides auto dry run protection
  • Separate mechanical safety thermostat
  • Temperature limiter installed in the controller
  • Motor protection swithch, transformer, insulation
  • Audible alarm in case of failure
     
Enquire Now
TT-168-PHE water TCU enlarge
TT-168-PHE water TCU
Back To Water Temperature Control Units

Need help or advice on our products? Enquire Now

/Content/Images/news/chemical-resized.jpg

Latest News

Chemical

In 2018 Tool-Temp installed two TT430 Y units to a chemical company. These units were produced for the customer and are now listed as a machine in our product range. We flew the customer out to our head office in Switzerland to meet with the person in charge of the project, once they had all the requirements the machines went through to production. The units are equipped with three independent heat exchangers. The three-circuit cooling system makes it possible to work with oil below zero degrees. The installed self-optimizing temperature controller MP-988 works with three temperature probe inlets. The reference temperature for the regulation can be the temperature of the product inside the vessel or the oil temperature in the tank of the unit. To avoid any damage of the jacket, the pump pressure can be adjusted to the specifications of the vessel/reactor. The pump revolutions per minute can be adjusted very easily using the frequency inverter. As well as many other features.

Read Article More News